Birchmeier 11925001 Fiche technique télécharger pdf (Page 15)

- 15 -

English

2. Part description

Filling cap

The membrane ventilates the air inside the spray tank, thereby preventing the contraction of the tank and

ensuring permanent suction of the spray mixture.

The O-ring prevents spillage of the spray mixture.

Filling filter

Always filter the spray agent through the filling filter into the tank. This protects the pump from foreign object

damage.

Spray tube support

The spray tube can be placed in the nozzle mount underneath, and clamped above in the gap between the

retaining ring to prevent the nozzle from contamination.

The adjustable pistol valve Vario Gun can be hooked into the rectangular notch when needed (see fittings on

page 42).

Spray tank

Robust, ergonomical plastic container with a 15 litre (4 US gallons) capacity.

Adjustable carrying belt

To shorten the shoulder straps, pull on the protruding straps of the belt, and to lengthen, move the buckles

up.

Click belt

Allows you to easily put on and take off the appliance. On one side fasten the belt, put the appliance on, and

comfortably click together with the second buckle.

Potentiometer, On/Off button

One turn to the right = appliance is switched on.

The pressure can be continuously adjusted from 0.5 – 6 bar.

LED display

Whilst the appliance is running the LED display provides information about the battery's current state of

charge. Green: State of charge > 50 %, yellow: State of charge 30 – 50 %, red: State of charge < 30 %. In the

event of failure, an error code will be displayed (see page 27).

Hose

Its length of 1.3 m (4.27 ft) enables maximum freedom of movement.

Trigger

Robust plastic valve with an integrated filter and screwed in spray tube connection. This enables the use of

our entire range of Birchmeier screw fittings (see page 42 and www.birchmeier.com).

Spray tube

Curved 50 cm (1.64 ft) long brass spray tube. You can find more spray tubes in the fittings section on page

42, and on www.birchmeier.com

Adjustable nozzle

The spray pattern and flow can be adjusted by turning the nozzle head in the following ways.

Spray sparingly (Close nozzle), misty (Open nozzle, ½ a turn) and for a jet stream (Open nozzle, turn 3 times)

For flow rates, please refer to the table on page 27.

Air vessel

The air vessel smooths out the pressure surges during the spraying.

Pump and motor

The electronically controlled piston pump controls the motor speed in accordance to the output required

(pressure and flow). In this way the battery is saved for a large part of the time, and you can use the

appliance for longer. Information about the period of application can be found in the table on page 27.

Battery

Depending on the model, the appliance is available to use with the easy-to-replace AGM battery or a quick-

change Li-ion battery.

The Li-ion battery automatically reverts to sleep mode when it is not used for a long period of time, in order to

avoid a full self-discharge. The battery will be reactivated by taking out the battery and reinserting it.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Birchmeier 11925001 Fiche technique Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Buses de pistolets à eau de jardin Birchmeier 11925001